Ceramics are often the choice of a new family to be used as the base of their residential floor. Not only for the bathroom, but ceramic tiles can also be used on other floors, such as the living room, kiu kiu online room or bedroom. If you want to replace your floor pads with ceramics tiles, you need to know how to install ceramics tiles that you can do yourself. Here are a few tips that you can understand.

1. Prepare the tools and materials needed

The first stage on how to install ceramic tiles certainly starts with choosing the ceramic tiles to be used. Buy ceramic tiles of the size and motif you like at the nearest building store or through the online shanties. Well, the right way to install ceramic tiles certainly requires 10 percent more ceramics than is needed in case you need more tiles for a floor that is not the same size.

How to install ceramics tiles? It certainly requires special materials. Don’t forget to buy equipment and other materials, like ceramic special cement, applicator boards, and ceramic grout. If needed, you should also prepare a wet tile saw in case you need to cut it.

2. Measure the floor area of ​​the room

The next step is to measure the floor of the room with a special ruler. Pull the meter from one wall to another, both up and down. Give a sign and make sure they will meet at one point in the middle of the room. Then, stick the yarn along the meter line and cut out the yarn. An important thread in this series of ways to install ceramics as a reference line when the installation process begins. Now, your floor is divided into four areas with the same distance.

3. Try installing ceramic tiles without cement

Before attaching the tile, try to set it on the floor first. Continue the series of ways to install ceramics from the middle of the thread meeting and use tile spacers to provide space between the tiles. How to install the right ceramic tile can not be done without knowing whether there are parts of the floor that can not be applied in full ceramic.

4. Soak ceramic tiles

An important step in this series of installation ceramics tiles is to soak the ceramic tile in a container filled with water for a while until the pores of the ceramic tiles absorb water. In addition to making ceramics more flexible, water will help prevent ceramics from being released when applied to the floor later.

5. Start to install ceramics

Apply cement to the floor where you will stick to the tiles. A good way to install ceramics is to start the application from the one-floor area first. Make sure the cement has been mixed with water and is free of gravel. Use the applicator board to implement how to install this tile and apply cement to the floor thinly. Don’t forget to wear gloves so your hands won’t get dirty.

Paste the tile, then press. When a row of ceramics tile is stuck, use any board with a flat surface to press the ceramics. It must be done so that the ceramic is installed at the same height.

6. Apply ceramic grout

Let stand ceramic tile that has been stuck to dry. The next way to install ceramics is to apply ceramic grout mixed with water. Ceramic grout is useful in how to install ceramics to fill the gaps between the ceramics. Use a flat applicator to apply the grout and make sure all sidelines are fully loaded.

It is important to install this ceramic tole to leave the grout for 5-15 minutes and clean it with a sponge. Be careful when using a sponge to clean other areas, making sure there are no droplets of water from the sponge because this can jeopardize the performance of the grout.